CX Series

Attention: open in a new window. PDFPrintE-mail

CX Gravity Feed

The Pequea CX Series gravity feed wood chippers are the ideal property management solution for homeowners, farmers and for large property maintenance. The CX series wood chippers are packed with commercial grade components such as double-sided knives, a standard chip anvil, a top discharge chip chute, and an industrial two-part urethane finish. Built rental tough, the CX series gravity feed chippers are available in 3” and 5” material diameters.

CX350-Chipper

CX350

  • Accepts material up to 3" in diameter
  • 3 Point Hitch PTO Drive (requires 15-30 HP tractor)
  • Left or right chip discharge
  • 2 reversible knives mounted with recessed bolts (no threaded knives)
  • Adjustable and reversible chip anvil
  • Easy to remove shields to access the drive components
  • High Speed 1700 RPM rotor requires less horsepower to operate while throwing the chips 10-15 feet farther than direct drive models
  • 350 lbs

alt Product Literature
alt Operations Manual
alt Parts Manual

 

CX550I

CX550

  • Accepts material up to 5" in diameter
  • 3 Point Hitch PTO Drive (25-60 HP Required)
  • 360 degree chip chute rotation
  • 4 reversible knives mounted with recessed bolts (no threaded knives)
  • Adjustable and reversible chip anvil
  • Easy to remove shields access the 3 cogged v-belt drive
  • High Speed 1700 RPM rotor requires less horsepower to operate while throwing the chips 10-15 feet farther than direct drive models
  • The rotor shaft is attached with a tapered bushing which perfectly balances the rotor, making this the smoothest running chipper on the market
  • 650 lbs.

alt Product Literature
alt Operations Manual
alt Parts Manual

CX Hydraulic Feed

The Pequea CX Series hydraulic feed wood chippers have the strength to handle any material that will fit in the generous 5” or 8” material opening. The CX hydraulic feed chippers are PTO driven but feature a high-speed rotor design traditionally only available on commercial engine drive chippers for greater power and efficiency. The CX series wood chippers are packed with commercial grade components such as double-sided knives, a standard chip anvil, a top discharge chip chute, and an industrial two-part urethane finish. Get the job done right with a CX series hydraulic feed chipper from Pequea.

CX551-ISO

CX551

  • Hydraulic feed
  • Accepts material up to 5" in diameter
  • 3 Point Hitch PTO Drive (25-60 HP Required)
  • 360 degree chip chute rotation
  • 4 reversible knives mounted with recessed bolts (no threaded knives)
  • Adjustable and reversible chip anvil
  • Easy to remove shields access the 3 cogged v-belt drive
  • High Speed 1700 RPM rotor requires less horsepower to operate while throwing the chips 10-15 feet farther than direct drive models
  • The rotor shaft is attached with a tapered bushing which perfectly balances the rotor, making this the smoothest running chipper on the market
  • 775 lbs.

alt Product Literature
alt Operations Manual
alt Parts manual

 

PHOTO COMING SOON

 

 

CX951

  • Hydraulic feed
  • Accepts material up to 9" in diameter
  • Trail behind draw bar (80 HP Required)
  • 360 degree chip chute rotation
  • 2 reversible knives mounted with recessed bolts (no threaded knives)
  • Adjustable and reversible chip anvil
  • 2100 lbs.

alt Product Literature 

 

 

 

PEQUEA PRODUCT TESTIMONIALS

Here's what a few of our customers have to say about their Pequea equipment:

Submit Your Story